Research Activities

Publications

1. Abdul-Ameer, A., “Frequency Induced Hydraulic Fracturing”, Proceeding of the 18^th International Conference on Computational and mathematical Methods in Science and Engineering, CMMSE 2018, 9-14 July, 2018.
2. Abdul-Ameer, A., “Long Gas Pipeline Mathematical Modelling”, Proceeding of the 17^th International Conference on Computational and mathematical Methods in Science and Engineering, CMMSE 2017, 4-8 July, 2017.
3. Abdul-Ameer, A., “Marine Drive System Regulation”, Universal Journal of Mechanical Engineering, Vol. 4, Issue 5, 2016, pp. 118-129.
4. Whalley, R. and Abdul-Ameer, A., “Pipeline Lateral Gas Flow Modelling and Impedance Matching”, International Journal of Engineering Systems Modelling and Simulation, IJESMS, Vol. 8, No. 1, 2016.
5. Abdul-Ameer, A. and K. Alhefeiti. “Statistical Analysis of Reinforced Concrete Bridge Defects for Optimum Maintenance Planning and Budgeting.” MATEC Web of Conferences. Vol. 83. EDP Sciences, 2016.
6. AlFaris, , Abu-Hijleh,  B. and Abdul-Ameer, A.,” Using integrated control methodology to optimize energy performance for the guest rooms in UAE hospitality sector”, Applied Thermal Engineering, 100, pp. 1085–109,4(2016)
7. Smadi, W., Abdul-Ameer, A. and Hltan, H., “The Environmental Radiation Pollution in Urban Buildings” Proceedings of Sustainable Built Environment Conference (SBE16), Dubai – UAE, January 17-19, 2016.
8. AlFaris, , Abu-Hijleh,  B. and Abdul-Ameer, A., “Optimization of the Energy Performance in the Hospitality Sector in  UAE by using the Integrated Control Methodology in the Guest Rooms.” Proceedings of the 7th International Conference on Sustainable Energy & Environmental Protection (SEEP2014), Dubai – UAE, Nov 23-25, 2014.
9. Whalley, R. and Abdul-Ameer, A., “Gas Pipeline Modelling and Control”, Proceedings of IMechE., Part C, Journal of Mechanical Engineering Science, Vol. 229(18), 2015, pp. 3320-3340.
10. Abdul-Ameer, A., “Machinery Drives and Dynamic Stresses”, International Journal of Advancements in Mechanical and Aeronautical Engineering, IJAMAE, Vol. 1, Issue 3, September 2014, pp. 145-149.
11. Whalley, R. and Abdul-Ameer, A., “Energy Efficient Gas Pipeline Transportation”, Journal of Systems Science and control Engineering, Taylor & Francis, Accepted May 2014, TSSC 924449.
12. Whalley, R. and Abdul-Ameer, A., “Ventilation System Modelling and Turbulence Minimisation”, International Journal of Modelling, Simulation and Scientific Computing, IJMSSC, Vol. 5, No. 1, 2014, 1350017, 27 pages.
13. Abdul-Ameer, “Drill String Modelling and Stress Analysis”, International Conference on Modelling, Simulation and Control 2012, World Congress on Engineering and Computer Science “WCECS 2012”, San Francisco, UAS, 24-26 October, 2012, pp. 1137-1142.
14. Whalley, R. and Abdul-Ameer, A., “The Transverse Vibration of High-Speed Rolls”, IMechE Part E, Journal of Process Mechanical Engineering, Vol. 226, No. 4, 2012, pp. 272-284.
15. Whalley, R. and Abdul-Ameer, A., “Warship Propulsion System Control”, IMechE Part C, Journal of Mechanical Engineering Science, Vol. 226, No. 10, 2012, pp. 2402-2421.
16. Abdul-Ameer, A, “The Modelling and Simulation of Gas Pipeline Dynamics”, The 8th WSEAS International Conference on DYNAMICAL SYSTEMS and CONTROL (CONTROL ’12), Porto, Portugal, 1-3 July, 2012, pp. 82-89.
17. Abdul-Ameer, A, ‘Modelling of Fluid Power Transmission Systems”, International symposium on Innovations in Intelligent Systems and Applications (INISTA), Istanbul, Turkey, 2011, pp. 205-211.
18. Whalley R, Abdul-Ameer, A and Ebrahimi, M., “The Axes Response and Resonance Identification for a Machine Tool”, Elsevier, Journal of Mechanism and Machine Theory, Vol. 46, 2011, pp. 1171-1192.
19. Whalley, R and Abdul-Ameer, A, “Heating, Ventilation and Air Conditioning System Modelling”, Elsevier, Journal of Building and Environment, Vol. 46, pp. 643-656, 2011.
20. Whalley, R and Abdul-Ameer, A, “The Dynamics of Cyclic Ventilation Systems”, Elsevier, Journal of Applied Mathematical Modelling, Vol. 35, pp. 93-108, 2011.
21. Whalley, R and Abdul-Ameer, A, “Ventilation System Airflow Dynamics”, IMechE Part I, Journal of System and Control Engineering, Vol. 224, No. 13, pp 305-320, 2010.
22. Whalley, R, Abdul-Ameer, A, Ebrahimi, M. and A Nikranjbar, “Winder Control Using a Ward-Leonard System”, International Journal of Industrial and Systems Engineering (IJISE), IJISE – Vol. 6, No. 2, pp. 129-162, 2010.
23. Whalley, R and Abdul-Ameer, A, “The Computation of Torsional, Dynamic Stresses”, IMechE Part C, Journal of Mechanical Engineering Science, Vol. 223, No. C8, pp 1799-1814, August 2009.
24. Whalley, R and Abdul-Ameer, A, “Whirling Prediction with Geometrical Shaft Profiling”, Elsevier, Journal of Applied Mathematical Modelling, Vol. 33, pp. 3166 – 3177, 2009.
25. Whalley, R and Abdul-Ameer, A, “Contoured Shaft and Rotor Dynamics”, Elsevier, Journal of Mechanism and Machine Theory, Vol. 44, No. 4, pp. 772 – 783, 2009.
26. Whalley, R, Abdul-Ameer, A., Ebrahimi, M. and El-Shalabi, S., “Adaptive Machine Tool System Regulation”, IET Journal of Control Theory & Applications, Vol. 3, No. 1, pp. 33 – 48, 2009.
27. Whalley, A. Abdul-Ameer and M. Ebrahimi, “Machine Tool Modelling and Profile Following Performance”, Elsevier, Journal of Applied Mathematical Modelling, Vol. 32, Issue 11, pp. 2290-2311, 2008.
28. Whalley R, Ebrahimi, M and Abdul-Ameer, A., “High Speed Rotor-Shaft Systems and Whirling Identification”, Proc. IMechE, Part C, Vol. 221, Issue No. 4, pp. 401 – 420, 2007.
29. Whalley, M. Ebrahimi, A. Abdul-Ameer and S. El Shalabi, “Optimum, Machine Tool Axis Traverse Regulation”, International Journal of Machine Tools and Manufacture, Vol. 46, pp. 1835 – 1853, 2006.
30. Whalley, M. Ebrahimi and A. Abdul-Ameer, “Machine Tool Axis Dynamics” Proc. IMechE, Part C, Vol. 220, Issue No. 4, pp. 403 – 419, 2006.
31. Whalley, M. Ebrahimi and A. Abdul-Ameer, “Hybrid Modelling of Machine Tool Drives”, International Journal of Machine Tools and Manufacture, Vol. 45, Issue 14, pp. 1560 – 1576, November 2005.
32. Ebrahimi, A. Abdul-Ameer and R. Whalley, “Computer Aided Modelling and Management of a Mechatronic System”, International Journal of Automation in Austria (IJAA), Special Issue, ISSN 1562-2703, pp. 87-103, 2005.
33. S. E. Moughith, A. A. Abdul-Ameer and A. Khanipour, “The dynamic modelling and simulation of cutting processes in turning”, 3^rd International Symposium on Multi-body Dynamics: Monitoring & Simulation Techniques (MBD-MST 2004), H. Rahnejat et al. (Eds.), MEP Ltd., London, UK.
34. Abdul-Ameer and A. Khanipour, “Hybrid model for a Drive line for a Vehicle Dynamometer”, Proceedings of ESDA2004, 7^th Biennial ASME Conference on Engineering Systems Design and Analysis, July 19-22, 2004, Manchester, UK.
35. A. Abdul-Ameer, A. Farshidianfar and M. Ebrahimi, “Modelling and simulation of turning processes”, in LASER METROLOGY AND MACHINE PERFORMANCE VI (Lamdamap 2003), D. G. Ford (Eds.), Published by WIT Press, Southampton, UK, pp. 171-180.
36. A. Abdul-Ameer, H. Bartlett and A. S. Wood, “Modelling and simulation of a vehicle dynamometer using hybrid modelling techniques”, in Multi-body Dynamics: Monitoring and Simulation Techniques-II (2000), H. Rahnejat et al. (Eds.), MEP Ltd., London, UK, pp. 327-335.
37. Bartlett and A. A. Abdul-Ameer, “Hybrid modelling of fluid power transmission systems”, Advanced Manufacturing Processes, Systems and Technologies (AMPST 99), M. K. Khan et al. (Eds.), MEP Ltd., London-UK.